37
9.4.3.
MB/LCD Function Check
1. Setting the DSC.
1-1) Set the battery to the camera.
1-2) Insert the SD memory card containing the “Enable
Test.txt” into the camera.
1-3) Turn off the power.
1-4) Continue pushing ”
W KEY” +“
MENU/SET”
+”
Playback” at the same time during several seconds.
* Please press "
Playback " last.
It starts in the state of “Engineer Mode” automatically.
1-5) Press “Playback” to enter selection menu.
1-6) Turn the DSC to the usual distance and brightness in
photography.
2. Execute MB/LCD Function Check.
2-1) Choose “MB/LCD” by Cursor key, and press “Play-
back”.
2-2) Change the flag status of “Disable” from 00001 to
00000 by Cursor key (Left / Right), and then press “Menu/
Set”.
2-3) Press “Menu/Set”, and select “OK”, and press
“Menu/Set” again to start checking.
2-4) Checking Items are executing in turn automatically
as follows.
- RTC --> Check the Crystal RTC
- Iris --> Check the Iris operation
- MSHUT --> Check the Mechanical Shutter operation
- ZOOM --> Check the Detection of Lens Zoom Position
(Wide/Tele)
- STROB --> Check Strobe board flash function
- CARD --> Check SD card socket can be read/write
- Memory --> Check Internal memory size
- AUDIO --> Check MIC and Speaker by REC/PLAY
audio file
2-5) The screen will show the result “OK” or “NG”.
2-6) Press “Playback” to return to calibration menu.
