13
Engli
sh
Tips for better shaving
Apply the whole system outer foil
perpendicularly against the skin and
shave by slowly gliding the shaver over
the face against the grain of the beard.
•The beard under the chin and around the
throat can be shaved better by stretching
the skin so the beard will stand.
•To prevent damaging the system outer
foil, do not shave with only a part of the
system outer foil.
You can also use a pen grip to hold the
shaver.
2
2
Press
when finished.
When the battery capacity is low
The charge status lamp ( ) blinks once every
second when operating the shaver.
The appliance beeps twice after switched off.
•You can shave 2 to 3 times after the charge
status lamp ( ) blinks. (This will differ
depending on usage.)
►
Using the trimmer
Slide the trimmer handle up. Place at a right
angle to your skin and move downwards to trim
your sideburns.
►
Tips for better usage
Apply the trimmer edge perpendicular to skin gently and move
downward slowly.
Trimming sideburns
Pre‑shave of long beards
►
Notes
•The “shaving sensor”, which automatically adjusts the power
depending on the beard thickness, will operate.
It will shave with high power on areas where the beard is heavy,
and reduce the power on areas where the beard is thin, to
reduce burden on the skin.
•Before shaving, check that the cleaning shutter is closed.
•After wet shaving, wash the main body with water and apply oil
to the system outer foil.
•Depending on the beard thickness or the amount of beard
trimmings in the shaver head, the shaving sensor may not react
and the driving sound may not change. This is not abnormal.
•The appliance may not operate in an ambient temperature lower
than approximately 5 °C.
Summary of Contents for Lamdash ES-BST6Q
Page 2: ...2 ...
