Panasonic KXTG5428B - 5.8 GHZ TOT 1HS Operating Instructions Manual Download Page 41 | Manualshive

Page: 41 / 56

background image

Useful Information

For assistance, please call 1-800-211-PANA (7262).

41

Error messages

If the unit detects a problem, one of the following messages will be displayed on the
handset.

Display message

Cause & solution

Error!!

L

When you tried to register the handset, the handset and
the base unit could not link for some reason, such as
interference from electrical appliances. Move the
handset and the base unit away from the electrical
appliances and try again.

No link to base.

Move closer to

base, try again.

L

The handset has lost communication with the base unit.
Move closer to the base unit, and try again.

L

Confirm that the base unit’s AC adaptor is plugged in.

L

Raise the base unit antennas.

L

The handset’s registration may have been canceled.
Re-register the handset (page 35).

Phonebook full

L

There is no space to store new items in the phonebook.
Erase unnecessary items (page 22).

No items stored

L

Your phonebook or redial list is empty.

Please lift up and

try again.

L

A handset button was pressed while the handset was
on the base unit. Lift the handset and press the button
again.

System is busy.

Please try again

later.

L

The handset has lost communication with the base unit.
Move closer to the base unit and try again.

Store VM access#

L

You have not stored the Voice Mail access number.
Store the number (page 28).

TG5428.book Page 41 Friday, August 25, 2006 9:54 AM

«
...
39
40
41
42
43
...
»

Summary of Contents for KXTG5428B - 5.8 GHZ TOT 1HS

























































Reviews:

No comments

Related manuals for KXTG5428B - 5.8 GHZ TOT 1HS

Brand: Uniden Pages: 68

Brand: T-Home Pages: 52

Brand: Uniden Pages: 6

Brand: switel Pages: 44

Brand: Tempo Fitness Pages: 6

Brand: ESI Pages: 114

Brand: Topcom Pages: 28

Brand: GAI-Tronics Pages: 8

ON-AIR 1100 CLASSIC

Brand: BT Pages: 18

Brand: QBest Pages: 17

Brand: Hitachi Pages: 96

Brand: Hitachi Pages: 29

Brand: Hitachi Pages: 27

Brand: Makita Pages: 68

Brand: Motorola Pages: 30

Brand: Motorola Pages: 156

Brand: Motorola Pages: 13

Brand: SpectraLink Pages: 6

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands