25
Useful Information
For assistance, please call: 1-800-211-PANA(7262)
Problem
While storing a phone
number, the unit starts to
ring.
You cannot page the
handset.
You cannot redial by
pressing
(REDIAL/PAUSE)
.
The RECHARGE indicator
flashes or the unit beeps
intermittently.
You charged the battery
fully, but the RECHARGE
indicator flashes.
The CHARGE indicator light
does not go out after the
battery has been charged.
You cannot have a
conversation using the
headset.
If you cannot solve your
problem
Remedy
•
To answer the call, press
or .
Start again from the beginning after
hanging up.
•
The handset is too far from the base unit.
•
The handset is engaged in an outside
call. Wait until the IN USE/HOLD
indicator light goes out.
•
If the last number dialed was more than
32 digits long, the number will not be
redialed correctly.
•
The button has a double function as
either redial or pause. It will redial the
last number dialed if pressed at the
outset of a call (p. 13). If another
number has been dialed first, it will
operate as a pause button (p. 17).
•
Charge the battery fully (p. 8).
•
Clean the charge contacts and charge
again (p. 9).
•
Install a new battery (p. 22).
•
This is normal.
•
Make sure that an optional headset is
connected properly (p. 19).
•
may have been pressed, press
to continue the conversation with
the headset.
•
Call our customer call center at
1-800-211-PANA(7262).
•
Panasonic’s e-mail address for customer
inquiries:
[email protected]
for customers in the USA or Puerto Rico
ONLY.
