13
For assistance, please call: 1-800-211-PANA(7262)
Basic Operation
If noise interferes with the conversation
Press
Ü
to select a clearer channel in the talk mode, or move closer to
the base unit.
To redial the last number dialed on the handset
Press or and
press
(REDIAL/PAUSE)
.
To adjust the receiver volume (HIGH, MEDIUM or LOW)
or speaker volume (6 levels) while talking
To increase, press
Ñ
. To decrease, press
Ö
.
While using
•
Each time you press
Ñ
or
Ö
, the volume level will change among 3 levels
(HIGH, MEDIUM or LOW).
Your phone comes from the factory set to level MEDIUM.
While using
•
Each time you press
Ö
or
Ñ
, the volume level will change among 6 levels.
Your phone comes from the factory set to level 3.
•
When you replace the battery, the selected receiver/speaker volume setting will
return to the factory set. Reprogram if necessary.
To put a call on hold
Press
(HOLD)
.
•
The TALK/MUTE indicator and the IN USE/HOLD indicator flash.
•
If you put a call on hold for more than 6 minutes, an alarm tone will sound. The
call will be disconnected after a total of 10 minutes.
To release the hold
Lift the handset, or press
or
.
•
If another phone is connected on the same line (p. 23), you can also release the
hold by lifting its handset.
