42
Troubleshooting for Portable Station
Problem
Description and Solution
The PS does not work.
• The battery is drained.
→
Charge the battery fully. (See “Charging” on page 5.)
• The PS has been canceled or the PS has not been registered.
→
Consult your dealer.
• The power is OFF.
→
Turn it ON. (See “Power On/Off” on page 7.)
The PS does not ring.
• Ringer volume is set to “
VIBRATION ON/RINGER OFF
”, “
MEETING
MODE
” or “
VIBRATION OFF/RINGER OFF
”.
→
Set to ring by pressing
. (See “Ringer Volume Adjustment” on
page 13.)
You cannot make/
receive a call.
• The PS is out of range or the Cell Station (CS) is busy.
→
Move closer to the CS or try again later.
• The radio channel is busy or a radio communication error
occurred.
→
Try again later.
You cannot dial.
• The number which you dialed is restricted by the Business
Telephone System.
→
Consult your dealer.
• The key lock mode is set.
→
To cancel the mode, depress
for about 2 seconds. (See “Locking
the Keypads” on page 7.)
• The radio channel is busy or a radio communication error
occurred.
→
Try again later.
Noise is frequently
caused.
→
Set the PS and CS away from other electrical appliances.
→
Move closer to the CS.
“CS BUSY” is displayed. • The Cell Station is busy.
→
Try again later.
“NEED REPAIR 1(-3)” is
displayed.
→
Consult your dealer.
“PS Not Connected” is
displayed.
• The called PS is out of range or the PS is power off.
→
Wait until the called PS moves closer to the CS, and try again.
MENU
Troubleshooting
TD7690.book Page 42 Wednesday, December 3, 2003 9:42 AM
