Panasonic KXF-013C, Operating Instructions Manual

Page: 34 / 49

Chapter 1 GENERAL DESCRIPTION Section 4 BASIC OPERATION
Page 4-2
(PB)
(PB)
(PB)
(PB)
(PB)
4-1-2 Contents of Operation Switch
No. operation button light switch color function
1
−
red
5 red
10
− − −
6
−
red
7
−
yellow
8
−
white
9
−
white
4
−
black
2
−
green
3 green
rotary
switch
The warning lamp turns on when there are less than
about ten boards.
Turn this switch on to go back to the production.
A switch to select the manual operation and the auto-
matic operation.
manual operation : function 3,7 are possible.
automatic operation : automatic operation.
AUTO : to finish the production.
This lamp will tune on.
Start the line to cancel this command.
For each mode.
To emergency stop the machine.
In case of manual operation, to take out a board.
When the machine produced boards which are as many
as the counter number which is set beforehand, the
machine will stop producing automatically.
If you want to start the line, reset the counter.
The indicator lamp of power switch.
A button to start the line.
The transfer conveyor of each unit start moving.
Manual operation : Go back to the starting point and re-
set the error.
Automatic operation : Reset the error.
PROD.END
MAGAZINE
RESET
PRODUCTION
COUNTER
RESET
MANU.AUTO
POWER
LINE
START
CYCLE
PASS
EMERGENCY
013C-E-OMA04-A01-00
To do the pass operation.
* (PB) means " push button "