manualshive.com logo in svg

Panasonic KX-WT125, Operating Instructions Manual, Page: 68 / 84

Share
Download
Panasonic KX-WT125 Operating Instructions Manual Download Page 68

Troubleshooting and Error Messages

68

Troubleshooting and Error Messages

Troubleshooting

Problem

Possible Cause

Solution

The handset 
does not work.

The batteries are drained.

Charge the batteries fully.
(See "Charging the Batteries" 
on page 6.)

The power is off.

Re-insert the batteries, and 

then set the handset on 
the charger. (See "Battery 
Installation" on page 5, and 
"Charging the Batteries" on 
page 6.)

The handset 
does not ring.

Ringer volume is set to 
"

Off

".

Adjust the ringer volume 
level.
(See "Adjusting the Ringer 
Volume" on page 15.)

Silent Mode is set to "

On

", 

or 

 is displayed on the 

LCD.

Press 

 for more than 2 

seconds to cancel the Silent 
Mode.

You cannot 
make/receive a 
call.

The handset is out of 
range, or the CS is busy.

Move closer to the CS or try 
again later.

The radio channel is busy, 
or a radio communication 
error occurred.

Try again later.

You cannot dial.

The number that you dialed 
is restricted by the PBX.

Consult your dealer.

Key lock mode is on.

To cancel the mode, press 

 for about 2 seconds.

(See "Key Lock" on page 9.)

The radio channel is busy 
or a radio communication 
error occurred.

Try again later.

Summary of Contents for KX-WT125





















































































Reviews:

No comments