manualshive.com logo in svg

Panasonic KX-WT125, Operating Instructions Manual, Page: 5 / 84

Share
Download
Panasonic KX-WT125 Operating Instructions Manual Download Page 5

Before Initial Use

5

Installation

Battery Installation

Open the battery cover, insert the batteries, and close the cover as indicated below.

Charger Connection

Connect the AC adaptor to the charger.

To AC Outlet

Hooks

•  The AC adaptor should be connected to a vertically oriented or floor-mounted 

AC outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the 

weight of the adaptor may cause it to become disconnected.

• 

Fasten the AC adaptor cord to the cord holder.

• 

Use only the included Panasonic AC adaptor. (See "Accessories (included)" on 
page 4.)

WARNING

•  To reduce the risk of fire or electric shock, do not overload AC outlets and 

extension cords.

• 

Do not bundle the charger’s AC adaptor cord with the power cords of machines 
located nearby.

• 

Completely insert the AC adaptor/power plug into the AC outlet. Failure to do so 

may cause electric shock and/or excessive heat resulting in a fire.

• 

Regularly remove any dust, etc. from the AC adaptor/power plug by pulling it from 
the power outlet, then wiping with a dry cloth. Accumulated dust may cause an 

insulation defect from moisture, etc. resulting in a fire.

Summary of Contents for KX-WT125





















































































Reviews:

No comments