Panasonic KX-UDT131, Operating Instructions Manual

Page: 35 / 66

Note
•
When a call is received, if the headset ringer is
on, the Bluetooth headset will ring even if the
handset is set to Silent Mode, or if "
Vibrate
"
or "
Ring On Charger
" is enabled.
Switching a Conversation between
the Handset and a Bluetooth
Headset
To switch a conversation from the handset to
the Bluetooth headset
•
Press twice.
To switch a conversation from the Bluetooth
headset to the handset
•
Press .
Adjusting the Microphone Volume of
a Bluetooth Headset
1.
Press or the [CENTRE] navigation key.
2.
Select "
Setting Handset
" by pressing the
arrow keys, and then press .
3.
Press [ ] or [ ] to select "
Bluetooth Option
",
and then press .
4.
Press [ ] or [ ] to select "
BT Headset
", and then
press .
5.
Press [ ] or [ ] to select "
Headset Mic Vol
",
and then press .
6.
Press [ ] or [ ] to adjust the volume (Level 1–6),
and then press .
Note
•
The microphone volume for the Bluetooth
headset can only be adjusted when the handset
is in standby mode.
Registering and Deregistering a
Cell Phone for Phonebook
Transfer
You can transfer the phonebook data of a cell phone to
the handset. Before performing the transfer, you must
register the cell phone to the handset. For details about
transferring a phonebook, see "Phonebook and vCard
Transfer by Bluetooth (Page 38)".
Registering a Cell Phone
1.
Press or the [CENTRE] navigation key.
2.
Select "
Setting Handset
" by pressing the
arrow keys, and then press .
3.
Press [ ] or [ ] to select "
Bluetooth Option
",
and then press .
4.
Press [ ] or [ ] to select "
Cell Phone
", and then
press .
5.
Press [ ] or [ ] to select "
Registration
", and
then press .
6.
If the "
Register
/
Deregister
" menu is displayed,
press [ ] or [ ] to select "
Register
", and then
press . Otherwise, proceed to step 7 .
7.
Complete the registration by operating the cell
phone.
Note
•
Follow the procedure above before doing any
operations on the cell phone. Otherwise, the cell
phone may not be registered.
•
When you operate the cell phone, the
handset’s Bluetooth PIN number is required.
For details, see "Setting and Changing the
Bluetooth PIN Number (Page 33)".
Deregistering a Cell Phone
1.
Press or the [CENTRE] navigation key.
2.
Select "
Setting Handset
" by pressing the
arrow keys, and then press .
3.
Press [ ] or [ ] to select "
Bluetooth Option
",
and then press .
4.
Press [ ] or [ ] to select "
Cell Phone
", and then
press .
5.
Press [ ] or [ ] to select "
Registration
", and
then press .
6.
Press [ ] or [ ] to select "
Deregister
", and then
press .
7.
Press [ ] or [ ] to select "
Yes
", and then press
.
Document Version 2012-11 Operating Instructions 35
Feature Operations