1 For Your Safety
To prevent personal injury and/or damage to property, be sure to observe the following safety precautions.
The following symbols classify and describe the level of hazard and injury caused when this DECT Cell
Station Unit (SIP) (SIP-CS) is operated or handled improperly.
WARNING
This notice means that misuse could result in
death or serious injury.
CAUTION
This notice means that misuse could result in injury
or damage to property.
The following types of symbols are used to classify and describe the type of instructions to be
observed
.
This symbol is used to alert users to a specific operating procedure that must not be performed.
This symbol is used to alert users to a specific operating procedure that must be followed in
order to operate the SIP-CS safely.
WARNING
•
Do not connect or disconnect the AC plug with wet hands.
•
Do not touch the SIP-CS, AC adaptor or AC adaptor cord during a lightning storm.
•
Do not allow anything to rest on the AC adaptor cord or LAN cable. Do not locate the SIP-CS where the
AC adaptor cord or LAN cable may be stepped on or tripped on.
•
When installing or testing a SIP-CS with an external AC adaptor, the AC adaptor should be plugged into
a wall outlet or floor-mounted AC outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as
the weight of the adaptor may cause it to become disconnected.
•
Make sure that you do not short the battery or cables.
•
Never attempt to insert wires, pins, etc. into the vents or other holes of the SIP-CS.
•
Do not splash water on the AC adaptor or the power cord, nor get them wet. Doing so can result in fire,
electric shock, or injury. If they do get wet, immediately disconnect the AC adaptor and power cord, and
contact an authorised service centre.
•
Do not touch the AC adaptor for extended periods of time. Doing so can lead to low-degree burns.
•
Do not make power connections that exceed the ratings for the AC outlet or power equipment. If the power
rating of a surge protector, etc. is exceeded, it can cause a fire due to heat buildup.
•
Care should be taken so that objects do not fall onto, and liquids are not spilled into, the SIP-CS. Do not
subject the SIP-CS to excessive smoke, dust, moisture, mechanical vibration, shock, or direct sunlight.
•
Do not place heavy objects on top of the SIP-CS.
•
Do not mount the SIP-CS in a manner other than that described in this manual.
Installation Guide
3
1 For Your Safety
