Panasonic KX-TVS50 - 2 Port Voicemail System, Installation Manual

Page: 201 / 416

SYSTEM FEATURES
Installation Manual 201
Calling a Beeper allows a subscriber to be notified by a beeper
when he has message(s). If the beeper has a
display, it is possible to send to it a callback
number. The callback number can be
recorded when a caller leaves a message. If
the caller does not leave a callback number,
the System Callback No., or the caller's
number if it is received through a telephone
company's Caller ID service, will be sent
instead.
To utilize this feature, follow the procedure
below.
1)
Go to the System Administration Top Menu,
and type 1-2 (Program-Class of Service) and
COS No.(1-63).
Select "Yes" in the Authorization for Message
Notification parameter. Make 1 selection
from the available options in the Beeper
Callback No. Entry Mode parameter.
2)
From the System Administration Top Menu,
type 1-1-1-Mailbox No.-Y-2-Device No.(1-3)
(Program-Mailbox Setting-Enter/Edit-
Mailbox No. Entry-Do you want to edit this
mailbox?-Notification Setting-Device No.
Entry).
For the Dial Number parameter: enter your
PBX's line access code before the beeper
number for dialing outward; enter an X after
the beeper number. (The X is for the caller to
enter his number as the callback number
which will later appear on your beeper.)
Finally, select "Beeper" in the Type of Device
parameter.
• See "Dial Number" and "Type of
Device" in Table 38 in
B2
SYSTEM
ADMINISTRATION—
MAILBOXES.
• See "Authorization for Message
Notification" and "Beeper
Callback No. Entry Mode" in
Tables 40 and 41 in
B3
SYSTEM
ADMINISTRATION—
SETTING COS (CLASS OF
SERVICE) PARAMETERS.
• See "System Callback Number"
in Table 63 in B6.7
Other
Parameters.
• See C3 SETTING COS
(CLASS OF SERVICE)
PARAMETERS.
Table 34
FEATURE DESCRIPTION REFERENCES