Panasonic KX-TVS50 - 2 Port Voicemail System Installation Manual Download Page 321

Page: 321 / 416

SYSTEM MANAGER'S GUIDE

Installation Manual

321

Press [2] to accept the number if it is correct.

Note
Press [2] to add mailbox numbers. Press [3] to review the mailing list. Press [ ] to
cancel message transfer.

Press [1] to record a message.

Record the message at the tone and Press [1].

Press [2] to accept the entry.

Press [1] to specify the delivery time and the private status.

Note
Press [2] to send the message immediately and return to the Main Menu.

10.

Press [1] to specify the delivery time.

11.

Type the time and Press [#].

12.

Press [1] for AM or [2] for PM.

Note
This selection is not available if "24-h" is selected in "Position of 'AM/PM' in Time
Stamp" in Table 59 in B6.5

Prompt Setting.

13.

Type the date (month and day) and Press [#].

14.

Press [2] to accept the entry.

15.

Press [1] to make this message private; otherwise, Press [2].

Summary of Contents for KX-TVS50 - 2 Port Voicemail System

































































































































































































































































































































































































































Search results

Summary of Contents for KX-TVS50 - 2 Port Voicemail System

Reviews:

Panasonic KX-TVS50 - 2 Port Voicemail System, Installation Manual, Page: 321 / 416

Search results

Summary of Contents for KX-TVS50 - 2 Port Voicemail System

Reviews: