Panasonic KX-TVA200, Installation Manual

Page: 92 / 208

4.1 Guidelines for APT/DPT Integration
92 Installation Manual
Trunk Service
(Universal Port) Each PBX trunk (CO line) group can be
assigned one of 4 incoming call services:
Voice Mail Service, Automated Attendant
Service, Interview Service, and Custom
Service.
Two-way Recording Subscribers can record conversations into
their own mailboxes by pressing a
preprogrammed flexible button.
Two-way Transfer Subscribers can record conversations into
another person's mailbox by pressing a
preprogrammed flexible button. and dialing
an extension number.
Caller ID Callback If Caller ID information was received for a
call, the subscriber can easily call back the
caller while listening to the message the
caller recorded.
DID Call Routing* 1
The VPS automatically sends calls from
preprogrammed DID numbers to the
specified extension, mailbox, or Custom
Service.
—
Remote Call
Forwarding Set The subscribers and the Message Manager
can program their extensions from a remote
location to forward various types of calls to a
desired extension or an outside telephone.
—
Time
Synchronization Whenever the PBX sets a new date and time
or when DPT Integration is established, the
data is automatically registered in the VPS.
—
Timed Reminder
Setting*
3
Allows subscribers to set the Timed
Reminder feature of the PBX using voice
prompts.
—
VM Menu* 4
Allows subscribers to access subscriber
services by navigating through menus
shown on their Digital Proprietary
Telephones (DPTs).
—
*
1 DID Call Routing and Toll Saver using DID numbers are only available when
the VPS is connected to the following PBXs with DPT Integration.
• KX-TD500: Software production date code 040702 or later.
• KX-TDA series (except KX-TDA50), MPR version 1.1 or higher
*
2 When an incoming trunk (CO line) call reaches the VPS via the PBX, the VPS
will wait about 5 s before answering the call in order to properly receive the
Caller ID information from the PBX. This waiting time is determined by the
"Waiting Time for Receiving Caller ID" setting (see 2.5.4 Parameters in the
Programming Manual).
Feature Description
Compatible
Integration Type
APT DPT