Panasonic KX-TVA200, Installation Manual

Page: 118 / 208

4.5 KX-TD500 PBX Programming for DPT Integration
118 Installation Manual
4.
Assignment of the extension ports connected to the VPS
a)
Continue the programming in the "1-4 VPS (DPT) Port Assignment" screen.
b)
Select the extension port number of the card (DLC/DHLC) to which the VPS (DPT) jack is
to be connected in the "Port No." menu.
Note
• This menu is displayed only when the attribute of the ports is assigned to "VPS (DPT)"
in step 2.
This program tells the KX-TD500 which extension ports are connected to the VPS.
This allows the KX-TD500 to send the proper Digital Integration information to these
ports.
Jack No.1 must be assigned, because its port is used as the channel to control the VPS.
c)
Assign "DN" for the port (click "DN Refer" to check the available directory numbers).
Note
• This program allows you to assign an extension number to each Voice Mail port. Since
each port connected to the VPS provides two extensions, this enables you to assign
extension numbers to each port. To reach the VPS, users dial these extension numbers.
d)
Assign "Extension Group No." for the port.
Note
• Specify the extension group number (126 or 127 by default) to which VM or AA is
assigned. Group numbers 1 to 128 are available to the VPS through additional
programming.
(Selecting VM has the same effect as selecting AA, regardless of how the VPS is
programmed.)
e)
Click "Apply" to save the changed data.
f)
Set "Status" to "INS" .