Panasonic KX-TSC11 Operating Instructions Manual Download

Page: 7 / 48

Preparation

For assistance, please call: 1-800-211-PANA(7262)

• Use only a Panasonic Handset for the KX-TSC11W or KX-TSC11B.
• Use only a telephone line cord included in the unit.
• If your unit is connected to a PBX which does not support Caller ID services,

you cannot access those services.

Programming Summary

You can program the following functions. The display shows the
programming instructions. See the corresponding pages for function
details.

Make sure that the handset is on the cradle.

During programming

* To select a desired function item, scroll through the items by pressing

[ ]

. Then press

[ENTER]

to go to the next step.

• You can exit the programming mode any time by pressing

[FUNCTION/EXIT]

• If you do not press any buttons for 60 seconds, the unit will exit the programming

mode.

Press

[FUNCTION/EXIT]

<Function menu>*

SAVE PHONEBOOK ?

. . . . .To store names and phone numbers in

memory (p. 22).

SET CLOCK ?

. . . . . . . . . .To adjust the time and date (p. 8).

CHANGE PASSWORD?

. . . . .To change the password for the call

restriction (p. 31).

CALL RESTRICT ?

. . . . . .To set the call restriction (p. 32).

SET FLASH TIME ?

. . . . .To select the flash time (p. 30).

SET DIAL MODE ?

. . . . . .To select the dialing mode (p. 10).

LCD CONTRAST ?

. . . . . . .To select the LCD contrast (p. 11).

SET AUTO EDIT ?

. . . . . .To set the Auto Edit (p. 12)

VM TONE DETECT ?

. . . . .To select the Voice Mail Tone detect (p. 13).

CHANGE LANGUAGE?

. . . . .To select the display language (p. 14).

▼

E-PQQX14369ZA.book 7 ページ２００４年１２月１０日金曜日午後４時１分

Summary of Contents for KX-TSC11

















































Search results

Summary of Contents for KX-TSC11

Reviews:

Related manuals for KX-TSC11

Brands by name

Popular brands

Panasonic KX-TSC11, Operating Instructions Manual

Search results

Summary of Contents for KX-TSC11

Reviews:

Related manuals for KX-TSC11

Brands by name

Popular brands