Panasonic KX-TSC10EXB, Service Manual

Page: 16 / 44

8. BLOCK DIAGRAM
9. CIRCUIT OPERATION
9.1. Bell Detector Circuit
When the bell signal is input between T/R, the signal are outputted at the speaker via the
following path: Tel line R1/C1 Pin 8 of IC2 Pin 5 of IC2 PC1 SW1 Ringer
9.2. Line Interface
In talk status, SW101 become ON and Q104 base changes to high level, causing Q104, Q102 to
turn on and resulting in a line loop.The loop current flows from D101(+) Q102 Q108
R114 D103 in that order.
9.3. MODULE BLOCK DIAGRAM
9.3.1. Telephone Line Interface
9.3.1.1. Circuit operation
- On hook
Q102 is open, Q102 is connected as to cut DC loop current and cut
the voice signal.
- Off hook
Q102 turns on thus providing an off-hook condition (active DC
16