Panasonic KX-TS600B Operating Instructions Manual Download | Manualshive

Page: 47 / 56

background image

Useful Inf

o

rmation

47

For assistance, please call: 1-800-211-PANA(7262)

For assistance, please visit http://www.panasonic.com/phonehelp

When using this unit, basic safety precautions should always be followed to
reduce the risk of fire, electric shock, or personal injury.

1.

Read and understand all instructions.

2.

Follow all warnings and instructions marked on this unit.

3.

Unplug this unit from wall outlets before cleaning. Do not use liquid or
aerosol cleaners. Use a damp cloth for cleaning.

4.

Do not use this unit near water, for example, near a bathtub, washbowl,
kitchen sink, or the like.

5.

Place this unit securely on a stable surface. Serious damage and/or injury
may result if the unit falls.

6.

Do not cover slots and openings on the unit. They are provided for ventilation
and protection against overheating. Never place the unit near radiators, or in
a place where proper ventilation is not provided.

7.

Do not place objects on the power cord. Install the unit where no one can
step or trip on the cord.

8.

Do not overload wall outlets and extension cords. This can result in the risk
of fire or electric shock.

9.

Never push any objects through slots in this unit. This may result in the risk of
fire or electric shock. Never spill any liquid on the unit.

10. To reduce the risk of electric shock, do not disassemble this unit. Take the

unit to an authorized servicenter when service is required. Opening or
removing covers may expose you to dangerous voltages or other risks.
Incorrect reassembly can cause electric shock when the unit is subsequently
used.

11. Unplug this unit from the wall outlet and refer servicing to an authorized

servicenter when the following conditions occur:
A. When the power supply cord or plug is damaged or frayed.
B. If liquid has been spilled into the unit.
C. If the unit has been exposed to rain or water.
D. If the unit does not work normally by following the operating instructions.

Adjust only controls covered by the operating instructions. Improper
adjustment may require extensive work by an authorized servicenter.

E. If the unit has been dropped or physically damaged.
F. If the unit exhibits a distinct change in performance.

12. During thunderstorms, avoid using telephones except cordless types. There

may be a remote risk of an electric shock from lightning.

13. Do not use this unit to report a gas leak, when in the vicinity of the leak.

SAVE THESE INSTRUCTIONS

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR ANY TYPE OF MOISTURE.

Important Safety Instructions

TS600W.book Page 47 Friday, October 28, 2005 2:10 PM

«
...
45
46
47
48
49
...
»

Summary of Contents for KX-TS600B

























































Reviews:

No comments

Related manuals for KX-TS600B

Brand: JBL Pages: 24

Brand: Teac Pages: 2

Brand: TeachLogic Pages: 28

Brand: Xblue Networks Pages: 52

Brand: Karel Pages: 13

Brand: Jabra Pages: 7

Brand: Uniden Pages: 55

Brand: Gigaset Pages: 15

Brand: Uniden Pages: 40

Brand: PHENYX PRO Pages: 12

Brand: Fortinet Pages: 271

Brand: JBL Pages: 2

Brand: Panacom Pages: 16

Brand: Swisscom Pages: 110

Brand: BT Pages: 67

Brand: Hamilton Beach Pages: 100

Brand: Hyundai Pages: 88

Brand: Geemarc Pages: 94

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands