Panasonic KX-TS600B Operating Instructions Manual Download Page 16

Page: 16 / 56

Settings

For assistance, please visit http://www.panasonic.com/phonehelp

Voice Mail (VM) Tone

If your voice mail service sends a voice mail tone after a new message has
finished recording, set to “ON”. “

” icon will flash on the display if a

message was recorded in your mailbox. You will hear a series of voice mail
tones then a dial tone after lifting the handset.
(Contact your service provider about your service.)

Set to “OFF” when:

— you subscribe the FSK voice mail service.

— you do not subscribe to a voice mail service.

— your voice mail service does not send a voice mail tone, or

— the unit is connected to PBX.

Your phone comes from factory set to “ON”.

Press

[[FUNCTION/EDIT]]

Scroll to “

Program ?

” by pressing

[ ]

, and press

[OK]

(

Yes

key).

Scroll to “

VM tone detect ?

” by

pressing

[ ]

Press

[OK]

(

Yes

key).

Select “

Off

” or “

” by pressing

[ ]

. (Ex. “

” is selected.)

Press

[OK]

(

Save

key).

• A long beep sounds.
• The display will return to step 3. To exit

the programming mode, press

[EXIT]

wait for 60 seconds.

VM tone detect ?

[OK]=Yes

VM tone detect

:On

[OK]=Save

TS600W.book Page 16 Friday, October 28, 2005 2:10 PM

Summary of Contents for KX-TS600B

























































Search results

Summary of Contents for KX-TS600B

Reviews:

Related manuals for KX-TS600B

Brands by name

Popular brands

Panasonic KX-TS600B, Operating Instructions Manual

Search results

Summary of Contents for KX-TS600B

Reviews:

Related manuals for KX-TS600B

Brands by name

Popular brands