Useful Information
50
For assistance, please visit http://www.panasonic.com/phonehelp
Programmable settings
Making/answering calls, intercom
Problem
Cause/solution
You cannot program
function items, such
as the dialing mode.
L
Programming is not possible while in the talk or intercom
mode.
L
Do not pause for over 30 seconds while programming.
L
Make sure that the unit is in standby mode.
Problem
Cause/solution
Static is heard, sound
cuts in and out.
L
If your unit is connected to a telephone line with DSL
service, we recommend connecting a noise filter between
the unit and the telephone line jack (see “Connecting 2
two-line telephone jacks” on page 18, “Connecting four
single-line telephone jacks” on page 19). Contact your
DSL provider for details.
You cannot redial the
last number dialed.
L
If the last number dialed was more than 32 digits long, the
number cannot be redialed.
L
Access numbers entered after pressing
{*}
(TONE) will
not be included when redialing.
You cannot have a
conversation using
the headset.
L
Make sure that
{
HEADSET
}
is pressed.
L
Make sure that the headset is plugged into the headset
jack properly (see “Connecting the optional headset to the
unit” on page 44).
During a power
failure, you cannot
make or answer a
call.
L
Make sure that a battery has been installed properly (see
“Battery installation” on page 12).
L
The battery may have been discharged. In that case,
replace the battery with a new one (see “Battery
replacement” on page 12).
The intercom does not
work.
L
DSL Internet connection and KX-TS4100/KX-TS4200/
KX-TS4300 Intercom work at similar frequencies. Please
contact Panasonic at 1-800-211-PANA (1-800-211-7262)
for special wiring configurations.
You cannot page
other extension.
L
The unit is in use. Try again later.
You cannot answer the
transferred call even
if the display shows
“
Transfer From
xx
”.
L
The transferred call was disconnected before you
answered it.
KXT4100̲OI.book Page 50 Friday, September 1, 2006 8:54 AM
