Advanced Operation
15
To store in a LOWER memory location
1
Press
(PROGRAM)
.
≥
The MUTE indicator flashes.
2
Enter a phone number, up to 22 digits.
≥
If you enter a wrong number, press
(PROGRAM)
and start again from
step 1.
3
Press
(AUTO/LOWER)
.
4
Press one of the one-touch auto dial buttons.
≥
A long beep sounds.
≥
The MUTE indicator light goes out.
≥
The unit will return to the standby mode.
≥
If 3 beeps sound, the number entered in step 2 may be over 22 digits. Lift
the handset and place it on the cradle to return to the standby mode, and
start again from step 1.
≥
If a pause is required for dialing, press
(PAUSE)
where needed. Pressing
(PAUSE)
counts as one digit (p. 17).
To erase a stored number
1
Press
(PROGRAM)
.
≥
The MUTE indicator flashes.
2
If the phone number is in an UPPER memory location, press the
one-touch auto dial button for the phone number to be erased.
OR
If the phone number is in a LOWER memory location, press
(AUTO/LOWER)
, then press the one-touch auto dial button for the
phone number to be erased.
≥
A long beep sounds.
≥
The MUTE indicator light goes out.
≥
The unit will return to the standby mode.
“
