Preparation
For assistance, please visit http://www.panasonic.com/phonehelp
9
Setting up the handset
Connecting the AC adaptor
L
Use only the included Panasonic AC
adaptor PQLV203.
Note:
L
The AC adaptor must remain connected
at all times. (It is normal for the adaptor
to feel warm during use.)
L
The AC adaptor should be connected to
a vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to
a ceiling-mounted AC outlet, as the
weight of the adaptor may cause it to
become disconnected.
Battery installation
Insert the battery (
A
), and press it down
until it snaps into the compartment (
B
).
Then close the handset cover.
Battery charge
Place the handset on the charger for
4
hours
before initial use.
While charging, the CHARGE indicator on
the charger lights. When the battery is fully
charged, “
Charge completed
” is
displayed.
Note:
L
If you want to use the handset
immediately, charge the battery for at
least 15 minutes.
L
To ensure that the battery charges
properly, clean the charge contacts of
the handset and charger with a soft, dry
cloth once a month. Clean more often if
the unit is subject to grease, dust, or
high humidity.
Battery strength
Note:
L
When the battery needs to be charged,
the handset beeps intermittently while it
is in use.
(120 V AC,
60 Hz)
A
B
Battery icon
Battery strength
1
Fully charged or high
2
Medium
3
Low
Flashing: needs to be
recharged.
4
Discharged
THA11.book Page 9 Tuesday, March 7, 2006 5:56 PM
