Panasonic KX-TH111C Operating Instructions Manual Download Page 68 | Manualshive

Page: 68 / 88

background image

Useful Information

68

Error messages

If the unit detects a problem, one of the following messages is shown on the display.

Display message

Cause/solution

Busy

L

The called handset or base unit is in use.

L

Other users are using the cellular line. Wait until the
CELLULAR SELECT button is lit in yellow-green on the
base unit and

[

shown in the top centre disappears

from the handset display.

L

Privacy mode is on for the call you tried to join (page
37).

L

The handset or base unit you tried to copy phonebook
items to is in use.

L

The handset you are calling is too far from the base unit.

Denied
Turn access on at
device.

L

The monitor feature is turned off on the destination
handset or base unit and the room cannot be monitored
(page 38).

Error!!

L

The handset’s registration or deregistration has failed.
Move the handset and the base unit away from all
electrical appliances and try again.

L

Another handset or base unit user tried to send
phonebook items to you but there was an error. Have
the other user re-send the items to you (page 25, 27).

Error!!
8 handsets have
already been
registered.

L

8 handsets have already been registered to the base
unit. The deregistered handset number is still retained
in the base unit. To register an additional handset,
erase the unnecessary handset number using the base
unit (page 45).

---Incomplete---

L

The destination unit’s phonebook memory is full. Erase
unnecessary items from the destination unit’s
phonebook (page 24, 27).

L

The destination unit is out of area.

L

The destination unit’s user may have pressed

{C}

or

{s}

on the handset or

{

SP-PHONE

}

on the base unit.

Invalid

L

There is no handset registered to the base unit
matching the extension number you entered.

L

You selected your own extension number.

Invalid.
Please register
to the base unit

L

The handset is not registered to the base unit. Register
the handset (page 45).

Memory full

L

There is no space in memory to record new songs.
Erase unnecessary songs (page 40).

Message full

L

There is no space in memory to record new messages.
Erase unnecessary messages (page 48).

TH111C(e).book Page 68 Thursday, August 17, 2006 5:03 PM

«
...
66
67
68
69
70
...
»

Summary of Contents for KX-TH111C

























































































Reviews:

No comments

Related manuals for KX-TH111C

Brand: Janome Pages: 22

Brand: Count Pages: 27

Brand: Kärcher Pages: 15

Brand: Janome Pages: 40

Easy Step Plus MS 80

Brand: Impex Pages: 9

CombBind DB28Pro

Brand: GBC Pages: 22

Brand: Pacific Floorcare Pages: 24

Brand: Merrylock Pages: 36

Brand: SOLAC Pages: 48

Brand: Black & Decker Pages: 24

Brand: Black & Decker Pages: 32

Brand: Black & Decker Pages: 32

Brand: Sharp Pages: 9

FO IS125N - B/W Laser - All-in-One

Brand: Sharp Pages: 4

Brand: Sharp Pages: 14

Brand: Sharp Pages: 52

Brand: Sharp Pages: 51

Brand: Sharp Pages: 82

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands