manualshive.com logo in svg

Panasonic KX-TGP700, Administrator'S Manual, Page: 142 / 399

Share
Download
Panasonic KX-TGP700 Administrator'S Manual Download Page 142

Value Range

0–16000 (0: Infinite time)

Note

•

Avoid setting 1–50 for any of the values.

Default Value

60,0

Configuration File Reference

DIAL_TONE1_TIMING

3.6.5.2  Busy Tone

Tone Frequencies

Description

Specifies the dual-tone frequencies, in hertz, of busy tones using 2
whole numbers separated by a comma.

Value Range

0, 200–2000 (0: No tone)

Note

•

If the value for this setting is "480,620", the unit will use a
mixed signal of a 480 Hz tone and a 620 Hz tone.

Default Value

480,620

Configuration File Reference

BUSY_TONE_FRQ

Tone Timings

Description

Specifies the pattern, in milliseconds, of busy tones using up to 10
whole numbers (off 1, on 1, off 2, on 2…) separated by commas.

Value Range

0–16000 (0: Infinite time)

Note

•

Avoid setting 1–50 for any of the values.

Default Value

60,500,440

Configuration File Reference

BUSY_TONE_TIMING

3.6.5.3  Ringing Tone

Tone Frequencies

Description

Specifies the dual-tone frequencies, in hertz, of ringback tones using
2 whole numbers separated by a comma.

Value Range

0, 200–2000 (0: No tone)

Note

•

If the value for this setting is "440,480", the unit will use a
mixed signal of a 440 Hz tone and a 480 Hz tone.

Default Value

440,480

Configuration File Reference

RINGBACK_TONE_FRQ

3.6.5 Tone Settings

142

Administrator Guide

Document Version: 2020-04

Summary of Contents for KX-TGP700
















































































































































































































































































































































































































Reviews:

No comments