Panasonic KX-TGP600G Operating Instructions Manual Download Page 1 | Manualshive

Page: 1 / 132

Panasonic KX-TGP600G Operating Instructions Manual Download Page 1

Base Unit

Model No.

KX-TGP600G

KX-TGP600CEG

KX-TGP600UKG

SIP Cordless Phone

KX-TGP600

Model No.

SIP Cordless Handset

KX-TPA60

Model No.

SIP Wireless Desk Phone

KX-TPA65/KX-TPA68

Model No.

Operating Instructions

KX-TGP600

KX-TPA65

KX-TPA68

KX-TGP600G/
KX-TGP600CEG/
KX-TGP600UKG

KX-TPA60

Thank you for purchasing this Panasonic product. Please read this manual carefully before
using this product and save this manual for future use.
Please use only the batteries provided and charge the batteries for about 6 hours or insert
the fully charged batteries before using the handset for the first time. For details, see
“Charging the Batteries”, Page 95 in this manual.

Note

R

In this manual, the suffix of each model number is omitted unless necessary.

R

The illustrations such as some keys may differ from the appearance of the actual product.

R

Certain products and features described in this document may not be available in your
country or area. Contact your phone system dealer/service provider.

R

The contents and design of the software are subject to change without notice.

Document Version: 2018-12

1
2
3
...
»

Summary of Contents for KX-TGP600G





































































































































Reviews:

No comments