3
2. Installation
2.1. Overview
Before you begin using your new Panasonic DECT system, we would like to provide you with a brief
overview of the steps required for installation.
Add DECT base (KX-TGP500) on the administration portal.
1.
Add DECT mobile handsets (KX-TPA50) on the administration portal.
2.
Add extension for DECT mobile handset on the administration portal and assign the respective
3.
mobile handset.
Register mobile handsets to base.
4.
Done!
5.
Detailed description of the individual steps are on the
.
2.2. Registering mobile handsets to the DECT base
During the final step, you must register the mobile handset to the base. This is done using the menu
of your Panasonic mobile handset.
To do so, open the main menu of your mobile handset.
(Joystick)
1.
Then select menu item “Initial Settings”.
2.
Next, select “Registration”.
3.
Now select “Register mobile handset”.
4.
Alternatively, instead of steps 1 to 4 you may also proceed as follows:
Press the menu key
(Joystick)
.
5. On the DECT base press and hold
for approx. 4 seconds, then “OK” on the mobile handset.
The mobile handset now scans for the DECT base.
6. As the final step, you now need to enter the required access code. It is: “0000”.
Your Panasonic DECT mobile handset is now registered to the base.