Panasonic KX-TGP500 Administrator'S Manual Download Page 86

Page: 86 / 284

Time

Description

Specifies the end time of DST (Summer Time) in minutes after 12:00
AM.

Value Range

0–1439

Default Value

120

Configuration File Reference

DST_STOP_TIME (Page 147)

3.6 VoIP

This section provides detailed descriptions about all the settings classified under the

[VoIP]

tab.

3.6.1 SIP Settings

This screen allows you to change the SIP settings that are common to all lines.

3.6.1.1 SIP Setting

SIP User Agent

Description

Specifies the text string to send as the user agent in the headers of SIP
messages.

Administrator Guide

Document Version 2013-02

3.6.1 SIP Settings

Summary of Contents for KX-TGP500





























































































































































































































































































Search results

Summary of Contents for KX-TGP500

Reviews:

Related manuals for KX-TGP500

Brands by name

Popular brands

Panasonic KX-TGP500, Administrator'S Manual

Search results

Summary of Contents for KX-TGP500

Reviews:

Related manuals for KX-TGP500

Brands by name

Popular brands