Setting the talking keypad and phonebook
You can enable this feature by setting its volume to
“
High
”
or
“
Low
”
, and disable it by setting its volume to
“
Off
”
. The default
setting is
“
Off
”
. This feature can be set for each unit.
1
For handset:
M
MENU
N#750
For base unit (using a handset):
M
MENU
N#*750
2
MbN
: Select the desired setting.
a
M
SAVE
N
a
M
OFF
N
Note:
R
If you dial a phone number quickly, the handset may not announce the dialled phone number
correctly. For best results, dial slowly, and wait for the handset to announce each number
before dialling the next.
R
Some names may not be announced properly.
R
Talking phonebook is not available in the following situations.
– When the base unit is in use (on an outside call or using the answering system)
– When another user is searching the phonebook, caller list, redial list, memory dial, or call
block list
Key tones
Use this procedure to change the volume of the tones that sound
when you press keys on the handset and base unit, or to turn them
off. The default setting is
“
Low
”
. Includes confirmation tones and
error tones, etc. This feature can be set for each unit.
1
For handset:
M
MENU
N#165
For base unit (using a handset):
M
MENU
N#*165
2
MbN
: Select the desired setting.
a
M
SAVE
N
a
M
OFF
N
Message indicator
The message indicator on the handset and base unit can indicate
unit status, as explained below.
26
Accessibility
0605_TGM42xAZ OI_ver002.pdf 26
5/6/2016 5:01:40 PM
