Panasonic KX-TGMA44AZ Operating Instructions Manual Download

Page: 11 / 76

Information on Disposal in other Countries outside the European
Union

These symbols are only valid in the European Union. If you wish to discard these items, please
contact your local authorities or dealer and ask for the correct method of disposal.

Note for the battery removal procedure

Refer to “Handset battery installation (for replacement)” on page 14.

HAC (Hearing Aid Compatibility) Support

This handset meets the standard for hearing aid compatibility. It is designed to work well with a
hearing aid, reducing noise.

Specifications

Standard:

DECT 6.0 (Digital Enhanced Cordless Telecommunications 6.0)

Frequency range:

1.88 GHz to 1.90 GHz

RF transmission power:

Approx. 10 mW (average power per channel)
115 mW (max.)

Power source:

220–240 V AC, 50/60 Hz

Power consumption:
Base unit:

Standby: Approx. 0.8 W
Maximum: Approx. 4.3 W

Charger:

Standby: Approx. 0.1 W
Maximum: Approx. 1.8 W

Operating conditions:

0 °C – 40 °C, 20 % – 80 % relative air humidity (dry)

Important Information

0605_TGM42xAZ OI_ver002.pdf 11

5/6/2016 5:01:39 PM

Summary of Contents for KX-TGMA44AZ













































































Search results

Summary of Contents for KX-TGMA44AZ

Reviews:

Related manuals for KX-TGMA44AZ

Brands by name

Popular brands

Panasonic KX-TGMA44AZ, Operating Instructions Manual

Search results

Summary of Contents for KX-TGMA44AZ

Reviews:

Related manuals for KX-TGMA44AZ

Brands by name

Popular brands