Operation
Operating time
Not in use (standby)
4 hours max.
Note:
R
Battery performance depends on the type of batteries.
R
Actual battery performance depends on usage and ambient environment.
R
If the base unit is running on battery power, the brightness of the message counter on the
base unit is reduced to save battery power.
R
When the base unit is running on battery power, the maximum ringer volume of the base unit
will be reduced.
R
If your phone service provider requires additional devices in order to make and receive calls,
such as a modem, you may still not be able to make and receive calls even if the base unit’s
backup power feature is functioning.
Base unit battery installation (for replacement)
Important:
R
The following AAA (R03) size batteries can be used with the base unit:
– Rechargeable Ni-MH batteries
– Standard (non-rechargeable) alkaline batteries
R
Do NOT use manganese batteries.
R
Confirm correct polarities (
,
).
*1 The base unit can fully charge Ni-MH batteries in about 15 hours.
*2 If the rechargeable batteries become depleted during a power failure, you can insert alkaline
batteries into the base unit. Remove the alkaline batteries when power is restored.
1
Disconnect the telephone line cord (
A
).
2
Open the battery cover (
B
).
3
Install the batteries in the battery compartment (
C
).
4
Close the cover (
D
), then reconnect the telephone line cord
(
E
).
A
E
C
B
D
16
For assistance, please visit http://shop.panasonic.com/support
Getting Started
TGM43x(en)_0426_ver031.pdf 16
2016/04/26 10:55:17
