Home
/
Panasonic
/
KX-TGM420
/
Operating Instructions Manual

Panasonic KX-TGM420, Operating Instructions Manual, Page: 178 / 207

Share

Page: 178 / 207

Panasonic KX-TGM420 Operating Instructions Manual Download Page 178

178 |

P a g e

Making/answering calls, intercom

Problem

Cause/solution

is

displayed.

•

The handset is too far from the base
unit. Move closer.

•

The base unit’s AC adaptor is not
properly connected. Reconnect AC
adaptor to the base unit.

•

The handset is not registered to the
base unit. Register it (page 127).

Noise is heard,
sound cuts in
and out.

•

You are using the handset or base
unit in an area with high electrical
interference. Re-position the base
unit and use the handset away from
sources of interference.

•

Move closer to the base unit.

•

If you use a DSL/ADSL service, we
recommend connecting a DSL/ADSL
filter between the base unit and the
telephone line jack. Contact your
DSL/ADSL provider for details.

«
...
176
177
178
179
180
...
»

Summary of Contents for KX-TGM420
















































































































































































































Reviews:

No comments