Panasonic KX-TGM420 Operating Instructions Manual Download Page 169

Page: 169 / 207

169 |

P a g e

Display
message

Cause/solution

Invalid

•

There is no handset registered to
the base unit matching the
handset number you entered.

•

The handset is not registered to
the base unit. Register the handset
(page 127).

Main unit no
power
or
No link.
Reconnect base
AC adaptor.

•

Confirm the base unit’s AC adaptor
is connected to the unit and the
power outlet correctly.

•

The handset has lost
communication with the base unit.
Move closer to the base unit and
try again.

•

Unplug the base unit’s AC adaptor
to reset the unit.

•

Reconnect the adaptor and try
again.

•

The handset’s registration may
have been canceled. Re-register
the handset (page 127).

Summary of Contents for KX-TGM420
















































































































































































































Search results

Summary of Contents for KX-TGM420

Reviews:

Panasonic KX-TGM420, Operating Instructions Manual, Page: 169 / 207

Search results

Summary of Contents for KX-TGM420

Reviews: