4
Wait for the paged party to answer.
R
If the paged party does not answer,
press
M
BACK
N
to return to the outside
call.
5
To complete the transfer:
Press
M
OFF
N
.
To establish a conference call:
M
MENU
N
a
MbN
:
“
Conference
”
a
M
SELECT
N
R
To leave the conference, press
M
OFF
N
.
The other 2 parties can continue the
conversation.
R
To put the outside call on hold:
M
MENU
N
a
MbN
:
“
Hold
”
a
M
SELECT
N
To resume the conference:
M
MENU
N
a
MbN
:
“
Conference
”
a
M
SELECT
N
R
To cancel the conference:
M
MENU
N
a
MbN
:
“
Stop conference
”
a
M
SELECT
N
You can continue the conversation
with the outside caller.
Intercom
Intercom calls can be made between
handsets.
Note:
R
When paging unit(s), the paged unit(s)
beeps for 1 minute.
R
If you receive an outside call while talking
on the intercom, the interrupt tone sounds.
To finish intercom, press
M
OFF
N
. To answer
the call, press
M
/
ZN
.
R
To change the ringer volume and ringer
tone for intercom, see page 25.
Making an intercom call
1
M
MENU
N
a
MbN
:
“
Intercom
”
a
M
SELECT
N
2
MbN
: Select the desired unit or
“
Voice
paging
”
.
a
M
SELECT
N
R
If you select
“
Voice paging
”
, speak
into the microphone after the beep.
Your voice will be heard using the
speakers of all handsets, until a paged
party answers your page or until you
press
M
OFF
N
.
After the other party answers, the
speakerphone mode is turned on.
3
When you finish talking, press
M
OFF
N
.
Note:
R
You can also use the
M
INTERCOM
N
soft
key, if displayed, to make intercom calls.
R
You cannot use voice paging if other units
are in use.
R
Voice paging is not available when a range
extender (KX-TGA405) is registered to the
base unit.
Answering an intercom call
1
When the unit is paged, lift the handset.
n
To answer using the receiver
Press
M
/
ZN
.
n
To answer using the speakerphone
Press and hold
M
/
ZN
for a few
seconds.
2
When you finish talking, press
M
OFF
N
.
Turning auto intercom on/off
This feature allows the handset to answer
intercom calls automatically when it is called.
You do not need to press
M
/
ZN
. When this
feature is set to
“
On
”
, the monitoring handset
for the baby monitor feature (page 31) will
also answer baby monitor calls automatically.
The default setting is
“
Off
”
.
1
M
MENU
N#273
2
MbN
: Select the desired setting.
a
M
SAVE
N
a
M
OFF
N
Note:
R
This feature is not available for all handsets
paging and voice paging even if it is turned
on.
For assistance, please visit http://shop.panasonic.com/support
17
Making/Answering Calls
TGL43x(en)_1117_ver041.pdf 17
2015/11/17 16:08:02
