R
This feature cannot be set during a
monitoring call.
1
Press
M
N
on the handset being
monitored.
2
MbN
:
“
Sensitivity Level
”
a
M
OK
N
3
MbN
: Select the desired setting.
a
M
OK
N
a
M
N
Answering the baby monitor
n
When monitoring with a handset:
Press
M
N
to answer calls.
If you want to respond from the monitoring
handset, press
M N
.
R
The monitoring handset will answer calls
automatically when the auto intercom
feature is set to
“
On
”
(page 24).
Note:
R
If you receive an outside call when
communicating with the monitored
handset, you hear 2 tones. To answer
the call, press
M
N
, then press
M
N
.
n
When monitoring from an outside line:
To answer a call, follow the operation for
your phone.
If you want to respond from the monitoring
handset, press
#1
using tone dialling.
You can turn off the baby monitor feature
by pressing
#0
.
Note:
R
2 minutes after the monitored handset
starts a call, communication between the
monitored handset and monitoring
phone line is turned off automatically.
Other programming
Changing the handset name
The default handset name is
“
Handset 1
”
to
“
Handset 6
”
. You can customise the name
of each handset (“Bob”, “Kitchen”, etc.). This is
useful when you make intercom calls between
handsets. To display the handset name in
standby mode, turn on the handset name
display feature (page 43).
1
M
N
(right soft key)
#104
2
Enter the desired name (10 characters
max.).
3
M
OK
N
a
M
N
Displaying the handset name
You can select whether or not the handset
name is displayed in standby mode. The
default setting is
“
Off
”
.
1
M
N
(right soft key)
#105
2
MbN
: Select the desired setting.
a
M
OK
N
a
M
N
Storing an area code to be
deleted automatically (for
landline call)
In some situations, phone numbers stored
automatically in the caller list (page 46) will
include area codes. If you do not want to dial
the area code when making landline calls from
the caller list, you can store the area code
which you want the unit to delete automatically.
Example:
You have stored the area code
“123”. If you make a landline call from the
caller list to the phone number
“123-456-7890”, the unit dials “456-7890”.
1
M
N
(right soft key)
#255
2
Enter an area code (5 digits max.).
a
M
OK
N
a
M
N
Call restriction
You can restrict selected handsets from
dialling certain numbers. You can assign up to
6 phone numbers to be restricted, and select
which handsets are to be restricted. Storing
area codes here prevents the restricted
handsets from dialling any phone number in
that area code.
1
M
N
(right soft key)
#256
2
Enter the base unit PIN (default:
“
0000
”
).
R
If you forget your PIN, contact an
authorised service centre.
43
Programming
TGH260BX_UE(en)_0806_ver021.pdf 43
2014/08/06 15:12:49
