Panasonic KX-TGH222AZB Operating Instructions Manual Download Page 51 | Manualshive

Page: 51 / 56

background image

Problem

Cause/solution

Sound quality seems to be
getting worse.

R

You have registered a handset that is not recommended
(page 4). The clearest sound quality is only possible by
registering the recommended handset.

The handset does not ring.

R

The ringer volume is turned off. Adjust ringer volume (page 15,
25).

R

Do not disturb mode is turned on. Turn it off (page 29).

The base unit does not
ring.

R

The ringer volume is turned off. Adjust ringer volume (page 15,
25).

I cannot make a call.

R

If you are using a BT double adaptor to connect the unit,
remove the adaptor and connect the unit to the phone wall
socket directly. If the unit operates properly, check or replace
the adaptor. (for New Zealand)

R

You dialled a call restricted number (page 33).

R

The key lock feature is turned on. Turn it off (page 17).

R

The unit is not designed to be used with rotary/pulse dialling
services.

Caller ID

Problem

Cause/solution

Caller information is not
displayed.

R

You must subscribe to a Caller ID service. Contact your
service provider/telephone company for details.

R

If your unit is connected to any additional telephone
equipment, remove and plug the unit directly into the wall
socket.

R

If you use a DSL/ADSL service, we recommend connecting a
filter (contact your DSL/ADSL service provider) to the
telephone line between the base unit and the telephone line
socket. Contact your DSL/ADSL provider for details. (for
Australia)

R

If you use a DSL/ADSL (JetStream) service, we recommend
that you contact your DSL/ADSL service provider to have a
DSL/ADSL Splitter installed. We do not recommend the use of
generic DSL/ADSL filters. Contact your DSL/ADSL service
provider for details. (for New Zealand)

R

Other telephone equipment may be interfering with this unit.
Disconnect the other equipment and try again. (for Australia)

R

Other telephone equipment such as a monitored Burglar Alarm
or the modem in the SKY Digital decoder may be interfering
with this unit. Disconnect the other equipment and try again.
(for New Zealand)

Caller information is slow
to display.

R

Depending on your service provider/telephone company, the
unit may display the caller’s information at the 2nd ring or later.
Set the first ring to

“

Off

”

R

Move closer to the base unit.

Time on the unit has
shifted.

R

Incorrect time information from incoming Caller ID changes the
time. Set the time adjustment to

“

Manual

”

(off) (page 25).

51

Useful Information

TGH222_23AZ(en)_0314_ver101.pdf 51

3/14/2014 10:01:17 AM

«
...
49
50
51
52
53
...
»

Summary of Contents for KX-TGH222AZB

























































Reviews:

No comments

Related manuals for KX-TGH222AZB

Brand: R.P.S. Corporation Pages: 48

Brand: Singer Pages: 66

Brand: Singer Pages: 24

Brand: Consew Pages: 42

Brand: Singer Pages: 10

GBC WireBind W18

Brand: GBC Pages: 38

Memory Craft Compulock II

Brand: Janome Pages: 38

Brand: EuroLite Pages: 32

Brand: Pfaff Pages: 12

Brand: ISM Pages: 33

Brand: JUKI Pages: 24

AMS-210EN Series

Brand: JUKI Pages: 249

Brand: SunStar Pages: 24

Brand: Monzana Pages: 44

Brand: SunStar Pages: 32

Brand: Viking Pages: 53

Brand: Yamato Pages: 15

Brand: Trelawny Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands