Base unit
1
M
CID
N
2
Press
MCN
to search from the most recent call,
or
MDN
to search from the oldest call.
3
To call back, press
M
CELL 1
N
or
M
CELL 2
N
,
then lift the corded handset.
To exit, press
M
EXIT
N
.
n
Using a landline
Handset / Base unit
1
Proceed with the operation for your unit.
Handset:
MCN
CID
Base unit:
M
CID
N
2
Press
MCN
to search from the most recent call,
or
MDN
to search from the oldest call.
3
Proceed with the operation for your unit.
Handset:
– To call back, press
M
N
.
– To exit, press
M
OFF
N
.
Base unit:
– To call back, lift the corded handset.
– To exit, press
M
EXIT
N
.
Note for handset and base unit:
R
If the entry has already been viewed or
answered, “ ” is displayed.
R
or
indicates the caller information was
received from the cellular line.
Editing a caller’s phone number
You can edit a phone number in the caller list by
removing its area code and/or the long distance
code “1”.
Handset
n
When a cellular phone is paired:
1
MCN
CID
2
MbN
: Select the desired entry.
a
M
SELECT
N
3
Press
*
(Edit) repeatedly until the phone
number is shown in the desired format.
4
Using a cellular line:
To make a cellular call, continue from step
4, “Viewing the caller list and calling back”,
page 49.
Using a landline:
M
N
n
When a cellular phone is not paired:
1
MCN
CID
2
MbN
: Select the desired entry.
a
M
MENU
N
3
MbN
:
“
Edit
”
a
M
SELECT
N
4
Press
M
EDIT
N
repeatedly until the phone
number is shown in the desired format.
5
M
N
Base unit
1
M
CID
N
2
MbN
: Select the desired entry.
3
Press
M
EDIT
N
repeatedly until the phone
number is shown in the desired format.
4
Using a cellular line:
Press
M
CELL 1
N
or
M
CELL 2
N
, then lift the
corded handset.
Using a landline:
Lift the corded handset.
Caller ID number auto edit feature
Handset / Base unit
Once you call back an edited number, the unit
which was used to call back remembers the area
code and format of the edited number. The next
time someone calls from the same area code,
caller information is customized by the unit as
follows:
– When the call is being received, the Caller ID
number is displayed in the same format as the
edited number.
– After the call has ended, the caller’s phone
number is displayed in the same format as the
edited number, when reviewed from the caller
list.
For example, you can use this feature to set the
unit to ignore the area code of callers in your area,
so that you can call these local numbers using
caller information without dialing the area code.
To activate this feature, you must edit an entry in
the caller list, then call that number. After that,
phone numbers from that caller’s area code are
edited automatically.
This feature can be set for each unit (page 42).
The default setting is
“
On
”
.
Note:
R
Phone numbers from the 4 most recently edited
area codes are automatically edited.
50
For assistance, please visit http://shop.panasonic.com/support
Caller ID Service
TGF380_TG590SK(en-en)_0907_ver201.pdf 50
2016/09/07 12:38:12
