Panasonic KX-TGFA30, Operating Instructions Manual

Page: 24 / 96

Making cellular calls
Important:
R The unit can be used to talk on 2 lines at the
same time (for example, 2 cellular lines, or the
landline and 1 cellular line).
R Only 2 Bluetooth devices can be used with the
unit at the same time (for example, 2 cellular
lines, or the headset and 1 cellular line).
R Before making calls, confirm that the
corresponding CELL indicator on the base unit
lights up (page 14).
1
Dial the phone number.
R To correct a digit, press M CLEAR N .
2
Press M CELL 1 N or M CELL 2 N .
3
Lift the corded handset.
4
When you finish talking, place the corded
handset on the cradle.
Note:
R While on a call, you can switch from the base
unit to the cordless handset as follows.
The call sharing mode must be on (page 43).
A Handset: M CELL N *1 a MbN : Select the
desired cellular phone. a M SELECT N
*1 The call is taken when:
– only 1 cellular phone is paired.
– a specific line is set to make cellular calls
(page 19).
B Base unit: Place the corded handset on the
cradle. When the speakerphone is used, press
M N .
R During a conversation with the corded handset,
you can switch to the speakerphone by pressing
M N , then place the corded handset on the
cradle.
Adjusting the receiver or speaker volume
Press MDN or MCN repeatedly while talking.
Note:
R The receiver or speaker volume you set is kept
for each line (landline and cellular lines).
Making a cellular call using the redial list
The last 10 phone numbers dialed are stored in
the redial list (each 48 digits max.).
1
M REDIAL N
2
MbN : Select the desired phone number.
3
Press M CELL 1 N or M CELL 2 N , then lift the
corded handset.
Erasing a number in the redial list
1
M REDIAL N
2
MbN : Select the desired phone number. a
M ERASE N
3
MbN : “
Yes
” a M SELECT N
4
M EXIT N
Making landline calls
1
Dial the phone number.
R To correct a digit, press M CLEAR N .
2
Lift the corded handset.
3
When you finish talking, place the corded
handset on the cradle.
Note:
R You can also dial the phone number after lifting
the corded handset.
R While on a call, you can switch from the base
unit to the cordless handset as follows.
The call sharing mode must be on (page 43).
A Handset: Press M N .
B Base unit: Place the corded handset on the
cradle. When the speakerphone is used, press
M N .
Using the speakerphone
1
During a conversation with the corded
handset, press
M N to turn on the
speakerphone.
R You can place the corded handset on the
cradle.
R Speak into the base unit microphone.
2
When you finish talking, press M N .
Note:
R To switch to the receiver, lift the corded handset.
Making a call using the redial list
The last 10 phone numbers dialed are stored in
the redial list (each 48 digits max.).
1
M REDIAL N
2
MbN : Select the desired phone number.
3
Lift the corded handset.
24 For assistance, please visit http://shop.panasonic.com/support
Making/Answering Calls Using the Base Unit
TGF380_TG590SK(en-en)_0907_ver201.pdf 24 2016/09/07 12:38:11