Note:
R
If the batteries are fully charged, but the operating time seems to be shorter,
clean the battery ends ( , ) and the charge contacts with a dry cloth and
charge again.
Removing the battery
1
2
Registering a handset to a base unit
1
Base unit:
Press and hold
M
LOCATOR
N
for about 5 seconds.
R
If all registered handsets start ringing, press
M
LOCATOR
N
again to stop,
then repeat this step.
2
Handset:
Place the handset on the base unit or charger, then wait until a long beep
sounds and is displayed.
Note:
R
If an error tone sounds, or if is displayed, register the handset according to
the base unit’s operating instructions.
Display language
1
M
MENU
N#110
2
MbN
: Select the desired setting.
a
M
SAVE
N
a
M
OFF
N
Using a Bluetooth headset
By pairing a Bluetooth headset to the handset, you can enjoy hands-free
conversations when talking over a phone calls. For details about the operations,
refer to the base unit’s operating instructions.
Important:
R
Your Bluetooth headset must support the Hands Free Profile (HFP) specification.
R
Up to 4 Bluetooth headsets can be paired to the handset.
R
Only 1 Bluetooth headset can be used with the unit at a time.
For assistance, please visit http://shop.panasonic.com/support
7
Installation
KX-TGDA99_0110_ver001.pdf 7
10/1/2021 7:56:45 AM
