R
For best performance, we recommend using your Bluetooth headset within 1 m
(3.3 feet) of the handset. The handset can communicate with Bluetooth
headsets within an approximately 10 m (33 feet) range.
Turning Bluetooth feature on/off
Once this feature is turned on, the Bluetooth
M
PAIR
N
button is enable to use and
the handset can perform other Bluetooth functions. The default setting is
“
Off
”
.
Important:
R
We recommend turning off the setting to save the battery life of your handset
when you are not using a Bluetooth headset.
1
M
MENU
N#613
2
MbN
: Select the desired setting.
a
M
SAVE
N
3
M
OFF
N
Pairing a Bluetooth headset to the handset
Important:
R
Make sure that the Bluetooth headset is not connected to any other Bluetooth
device.
R
Refer to the headset’s operating instructions. If your headset PIN is not
“
0000
”
,
change the Bluetooth PIN beforehand (page 10).
1
Bluetooth headset:
Set your headset to pairing mode.
2
Handset:
Press and hold
M
PAIR
N
for about 3 seconds.
3
Wait until a long beep sounds.
R
When the Bluetooth headset is ready for use,
M
N
is displayed.
*1
*1 Corresponding headset number is indicated next to the item.
Note:
R
In step 2, if the handset has been paired with a maximum of 4 headsets, you
can overwrite any unwanted headset by pressing
M
YES
N
a
MbN
: Select the
desired headset
a
M
SELECT
N
.
Connecting/disconnecting a Bluetooth headset
To use your headset with another Bluetooth device, you may need to disconnect it
from the handset. If you want to use it again, reconnect the headset to the handset.
Important:
R
Make sure that the headset is turned on.
8
For assistance, please visit http://shop.panasonic.com/support
Installation
KX-TGDA99_0110_ver001.pdf 8
10/1/2021 7:56:45 AM
