Panasonic KX-TGD890C, Operating Instructions Manual

Page: 49 / 72

Resetting to a pre-recorded greeting
message
Use this procedure to erase your greeting
message and use a pre-recorded one.
1
M MENU N#304
2
M YES N a M OFF N
Playing back the greeting
message
1
M MENU N#303
2
To exit, press M OFF N .
Listening to messages
Important:
R When using the base unit or handset to
listen to messages, the noise reduction
feature (page 21) is activated automatically
in spite of the setting (
is not
displayed).
Using the base unit
When new messages have been recorded,
the message indicator (
) on the base unit
flashes.
Press
M N (PLAY).
R During playback, the message indicator
(
) on the base unit lights.
R If new messages have been recorded, the
base unit plays back new messages.
R If there are no new messages, the base
unit plays back all messages.
Operating the answering system
during playback
Key Operation
MjN or MkN Adjust the speaker
volume
M N
Repeat message
*1
M N Skip message
M N (STOP) Stop playback
Key Operation
M ERASE N Erase currently playing
message
*1 If pressed within the first 5 seconds of a
message, the previous message is
played.
Erasing all messages
Press M ERASE N 2 times while the unit is not in
use.
Using the handset
When new messages have been recorded,
“
New message
” is displayed.
1
To listen to new messages:
M MENU N#323
To listen to all messages:
M MENU N#324
2
When finished, press M OFF N .
Note:
R To switch to the receiver, press M TALK/ ZN .
R You can also use the M PLAY N soft key, if
displayed, to play new messages.
Operating the answering system
M MENU N a MbN : “
Answering device
” a
M SELECT N
Key Operation
MDN or MCN Adjust the receiver/speaker
volume (during playback)
1 or MFN Repeat message (during
playback)
*1
2 or MEN Skip message (during
playback)
3 Enter the “
Settings
” menu
4 Play new messages
5 Play all messages
6 Play greeting message
76 Record greeting message
8 Turn answering system on
M PAUSE N Pause message *2
For assistance, visit www.panasonic.ca/english/support 49
Answering System
TGD890C(en)_0627_ver008.pdf 49 2023/06/27 12:17:26