Panasonic KX-TGD590C, Quick Manual

Page: 4 / 20

– 4 –
Pairing a Bluetooth cellular phone
1
Base unit:
Press and hold
{
CELL 1
}
or
{
CELL 2
}
for about 5 seconds.
L
After the corresponding CELL indicator on the base unit starts flashing, the rest of the
procedure must be completed within 5 minutes.
2
Your cellular phone:
While the corresponding CELL indicator is flashing, follow the instructions of your cellular
phone to enter the pairing mode.
L
Depending on your cellular phone, it may ask you to enter the Bluetooth PIN (default:
“ 0000 ” ).
L
If your cellular phone prompts you to confirm the passkey, tap
{
OK
}
or otherwise to accept
the pairing request.
3
Base unit:
Wait until a long beep sounds.
L
It may take more than 10 seconds to complete pairing.
L
When the corresponding CELL indicator lights up, the cellular phone is connected to the
base unit. You are ready to make cellular calls.
Note:
L
Make sure that your cellular phone is set to connect to this product automatically. Refer to your
cellular phone’s operating instructions.
Base unit: CELL indicators
Status Meaning
On A cellular phone is connected. Ready to make/receive cellular calls.
Flashing − The cellular line is in use.
− Phonebook entries are being copied from a cellular phone.
− The base unit is searching for the paired cellular phone.
− The base unit is pairing a cellular phone.
− A cellular call is on hold.
− The remote voice assist feature is in use.
Flashing rapidly A cellular call is being received.
Light off − A cellular phone is not paired to the base unit.
− A cellular phone is not connected to the base unit.
Handset: Link to cell display items
t
d
− A cellular line is in use.
*1
L
When flashing: The cellular call is on hold.
L
When flashing rapidly: A cellular call is being received.
− The remote voice assist feature is in use.
*1 Corresponding lines (1, 2: cellular line) are indicated next to the item.
x
d
A cellular phone is connected.
*1
Ready to make/receive cellular calls.
L
When turned off: A cellular phone is not connected to the base unit.
*1 Corresponding lines (1, 2: cellular line) are indicated next to the item.
uv
− A cellular call is in progress on that line.
− The cellular line is selected for the setting.
Link to cell
TGD59xC(en)_QG.fm Page 4 Friday, January 6, 2017 4:22 PM