Problem
Cause/solution
Caller information is displayed
or announced late.
R
Depending on your phone service provider, the unit may
display or announce the caller’s information at the 2nd
ring or later.
R
Move closer to the base unit.
Caller information is not
announced.
R
The ringer volume for landline is turned off. Adjust the
ringer volume (page 35).
R
The ringer volume for cellular line is turned off. Adjust the
ringer volume (page 33).
R
The unit which is not selected to ring for cellular calls
does not announce caller information. To change the
selection, see page 17.
R
The Talking Caller ID feature is turned off. Turn it on
(page 35).
R
The ring as cell mode is set to
“
On (without Talking
CID)
”
. To change the mode, see page 17.
R
The number of rings for the answering system is set to
“
2
rings
”
or
“
Toll saver
”
. Select a different setting
R
Your unit does not announce caller information while the
other devices such as headset or handsets are engaged
in a call.
I cannot dial the phone number
edited in the caller list.
R
The phone number you dialed might have been edited
incorrectly (for example, the long distance “1” or the area
code is missing). Edit the phone number with another
pattern (page 44).
Time on the unit has shifted.
R
Incorrect time information from incoming Caller ID
changes the time. Set the time adjustment to
“
Manual
”
(off) (page 35).
The 2nd caller’s information is
not displayed during an outside
call.
R
In order to use Caller ID, call waiting, or Call Waiting
Caller ID (CWID), you must first contact your phone
service provider and subscribe to the desired service.
After subscribing, you may need to contact your phone
service provider again to activate this specific service,
even if you already subscribed to both Caller ID and Call
Waiting with Caller ID services (CWID).
For assistance, visit www.panasonic.ca/english/support
65
Useful Information
KX-TG273CSK̲(en-en)̲0525̲ver110.pdf 65
2018/06/02 10:39:12
