Error messages
Display message
Cause/solution
Ask phone
company for
VM access #
R
You have not stored the voicemail access number.
Store the number (page 56).
Busy
R
No cellular phone is paired to the base unit. Pair a
cellular phone (page 16).
R
The called unit is in use.
R
Other units are in use and the system is busy. Try
again later.
R
The handset you are using is too far from the base
unit. Move closer and try again.
R
Only 2 Bluetooth devices can be used with the unit at
the same time (for example, 2 cellular lines, or the
headset and 1 cellular line).
R
The voice recognition feature could not be activated.
Try again later.
Check tel line
R
The supplied telephone line cord has not been
connected yet or not connected properly. Check the
connections (page 10).
R
If you do not connect the telephone line cord and use
only cellular lines, set the cellular line only mode
(page 18).
Error!!
R
Recording was too short. Try again.
R
Someone is using a cellular line or headset. Try
again later.
R
The phonebook copy is incomplete (page 45). The
cellular phone is disconnected from the base unit.
Make sure that other Bluetooth devices are not
connected to the cellular phone, and try again.
Failed
R
Although the unit tried to connect to the cellular
phone or headset, the connection has been failed.
– Someone is using a cellular line or headset. Try
again later.
– Make sure that the cellular phone or headset is
not connected to other Bluetooth devices.
Invalid
R
There is no handset registered to the base unit
matching the handset number you entered.
R
The handset is not registered to the base unit.
Register the handset (page 40).
60
For assistance, visit www.panasonic.ca/english/support
Useful Information
KX-TG273CSK̲(en-en)̲0525̲ver110.pdf 60
2018/06/02 10:39:11
