24
KX-TGC210LAB/KX-TGC212LAB/KX-TGC213LAB/KX-TGC220LAB/KX-TGC222LAB/KX-TGC223LAB/KX-TGCA20LAB
8 Test Mode
8.1.
Engineering Mode
8.1.1.
Base Unit
Important:
Make sure the address on LCD is correct when entering new data. Otherwise, you may ruin the unit.
Dial keypad
9). Press
(off) to return to standby mode.
After that, turn the base unit power off and then power on.
2). Select "Initial Setup" using or
then press
{
OK
}
.
H/S key operation
{^} {V}
4). Enter "7", "2", "6", "2", "7", "6", "6", "4".
Note:
7262 7664 = PANA SONI
(see letters printed on dial keys)
6). Enter " ", " ", " ", " " (Address). (*1)
7). Enter " ", " " (New Data). (*1)
5). Select "Write EEP" using or
then press
or
{
>
}
.
{^} {V}
3). Select "Line Setup" using or
then press
{
OK
}
or
{
>
}
.
{^} {V}
_ _ _ _ _ _
H/S LCD
Set Addr.:
Default Data
Set Addr.:
C
OK
New Data
Set Addr.:
C
OK
8). Press , a long confirmation beep
will be heard.
{
OK
}
OK
Service Mode
Read EEP
Write EEP
{
OK
}
Get S/W Ver.
{
TALK:Talk
}
{
}
{
OFF
}
{
FLASH
}
{
CALL WAIT
}
(Call wait)
Soft keys
(Volume) key/
(Phonebook)/
CID (Caller ID) key/
REDIAL (Redial) key/
Navigator key/
(Off)
This pictured model is KX-TGC220
1). Press
{
}
