background image

Important Information

6

L

This product is unable to make calls when:
– the handset batteries need recharging or 

have failed.

– there is a power failure.

Battery

L

We recommend using the batteries noted 
on page 4. 

USE ONLY rechargeable Ni-

MH batteries AAA (R03) size.

L

Do not mix old and new batteries.

L

Do not open or mutilate the batteries. 
Released electrolyte from the batteries is 
corrosive and may cause burns or injury to 
the eyes or skin. The electrolyte is toxic and 
may be harmful if swallowed.

L

Exercise care when handling the batteries. 
Do not allow conductive materials such as 
rings, bracelets, or keys to touch the 
batteries, otherwise a short circuit may 
cause the batteries and/or the conductive 
material to overheat and cause burns.

L

Charge the batteries provided with or 
identified for use with this product only, in 
accordance with the instructions and 
limitations specified in this manual.

L

Only use a compatible base unit (or 
charger) to charge the batteries. Do not 
tamper with the base unit (or charger). 
Failure to follow these instructions may 
cause the batteries to swell or explode.

General notices

L

This equipment will be inoperable when 
mains power fails.

L

When a failure occurs which results in the 
internal parts becoming accessible, 
disconnect the power supply cord 
immediately and return this unit to an 
authorised service centre.

L

Disconnect the telecom connection before 
disconnecting the power connection prior to 
relocating the equipment, and reconnect 
the power first.

L

No “111” or other calls can be made from 
this device during a mains power failure.

L

This equipment shall not be set to make 
automatic calls to the Telecom “111” 
Emergency Service.

L

To minimise the possibility of lightning 
damage, when you know that a 
thunderstorm is coming, we recommend 
that you:
– Unplug the telephone line cord from the 

phone socket.

– Unplug the AC adaptor from the AC 

power outlet.

L

The earpiece on the handset is magnetised 
and may retain small metallic objects.

L

Not all telephones will respond to incoming 
ringing when connected to the extension 
socket.

L

This equipment may not provide for the 
effective hand-over of a call to another 
device connected to the same line.

L

The grant of a Telepermit for any item of 
terminal equipment indicates only that 
Telecom has accepted that the item 
complies with minimum conditions for 
connection to its network. It indicates no 
endorsement of the product by Telecom, 
nor does it provide any sort of warranty. 
Above all, it provides no assurance that any 
item will work correctly in all respects with 
another item of Telepermitted equipment of 
a different make or model, nor does it imply 
that any product is compatible with all of 
Telecom’s network services.

Important notice:

L

Under power failure conditions, this 
telephone may not operate. Please ensure 
that a separate telephone, not dependent 
on local power, is available for emergency 
use.

Important safety 

instructions

When using your product, basic safety 
precautions should always be followed to 
reduce the risk of fire, electric shock, and 
injury to persons, including the following:
1. Do not use this product near water for 

example, near a bathtub, washbowl, 
kitchen sink, or laundry tub, in a wet 
basement or near a swimming pool.

TGB21xNZ(en).book  Page 6  Monday, March 24, 2014  2:21 PM

Summary of Contents for KX-TGB210NZ





































Reviews: