Panasonic KX-TGB210NZ Page 31 Operating Instructions Manual Download

Page: 31 / 36

Useful Information

Warranty

Panasonic New Zealand undertakes to:

Repair or at its option, replace without cost to the owner, either for material or labour,

part which is found to be defective within two years of the date of purchase.

THIS EXPRESS WARRANTY DOES NOT COVER:

IF YOUR PANASONIC PRODUCT FAILS WITHIN THE
WARRANTY PERIOD:

Take it to the Authorised Panasonic Dealer from whom you purchased the product

will repair it (or arrange to have it repaired) during their normal business

enquiries regarding warranty or otherwise, please call – Customer

e Tel. No.: (09) 272 0178

NOTE: THIS EXPRESS WARRANTY IS OFFERED AS AN

BENEFIT AND DOES NOT AFFECT YOUR LEGAL

1) Pick up and delivery.

2) Batteries.

3) Repairs when the product has not been used in accordance with the Operating
Instructions Manual or has been modified.

4) Normal maintenance and cleaning as required in the product’s Operating
Instructions Manual.

5) Service calls to:

a Correct the set up of the product
b Instruct you how to use the product
c Replace fuses or correct your building’s wiring

6) Damage to the product caused by accident, misuse or Act of God.

7) Repairs when the product has been dismantled, repaired, modified or serviced

by other than a Panasonic Authorised Dealer authorised to service that type of
product.

any

Centr

All

who

RIGHTS.

EXTRA

Support

hours.

TGB21xNZ(en).book Page 31 Monday, March 24, 2014 2:21 PM

Summary of Contents for KX-TGB210NZ





































Search results

Summary of Contents for KX-TGB210NZ

Reviews:

Related manuals for KX-TGB210NZ

Brands by name

Popular brands

Panasonic KX-TGB210NZ, Operating Instructions Manual

Search results

Summary of Contents for KX-TGB210NZ

Reviews:

Related manuals for KX-TGB210NZ

Brands by name

Popular brands