Panasonic KX-TGA740 Service Manual Download Page 75

Page: 75 / 102

KX-TG7411MEB/KX-TG7412MEB/KX-TGA740MEB

14 Schematic Diagram

14.1. For Schematic Diagram

14.1.1. Base Unit (Schematic Diagram (Base Unit_Main))

Notes:

1. DC voltage measurements are taken with voltmeter from the negative voltage line.

2. The schematic diagrams may be modified at any time with the development of new technology.

14.1.2. Handset (Schematic Diagram (Handset_Main))

Notes:

1. DC voltage measurements are taken with an oscilloscope or a tester with a ground.
2. The schematic diagrams may be modified at any time with the development of new technology.

14.1.3. Charger Unit (Schematic Diagram (Charger Unit))

Notes:

1. DC voltage measurements are taken with voltmeter from the negative voltage line.

2. The schematic diagrams may be modified at any time with the development of new technology.

Summary of Contents for KX-TGA740







































































































Search results

Summary of Contents for KX-TGA740

Reviews:

Related manuals for KX-TGA740

Brands by name

Popular brands

Panasonic KX-TGA740, Service Manual

Search results

Summary of Contents for KX-TGA740

Reviews:

Related manuals for KX-TGA740

Brands by name

Popular brands