5
Place the handset on the charger for about 7 hours before initial use.
Note:
• The handset display may show
“
Please wait for 1 minute.
”
when the handset is
placed on the charger if it is not registered to the base unit.
• If the batteries are fully charged, but the operating time seems to be shorter, clean the
battery ends (
S
,
T
) and the charge contacts with a dry cloth and charge again.
Display language
16 display languages are available.
1
{
B
}
(right soft key)
(
11
)
2
{
r
}
: Select your desired language.
s
{
OK
}
s
{i
c
}
Registering the handset to the base unit
Ensure that the handset is switched on. If it is not on, press and hold
{i
c
}
for few seconds
to turn the handset on.
1
Handset:
Lift the handset and press
{i
c
}
.
2
Base unit:
Press and hold
{x}
for about 5 seconds.
• Depending on the base unit, a registration tone sounds.
• If all registered handsets start ringing, press
{x}
again to stop, then repeat this step.
3
Handset:
Place the handset on the base unit or charger.
• Continue the operation even when the handset display shows
“
Please wait for 1
minute.
”
.
4
With the handset still on the base unit or charger, wait until a confirmation tone sounds
and
w
is displayed.
Note:
• If an error tone sounds, or if
_
is displayed, register the handset according to the base
unit’s operating instructions.
You can select
“
”
,
“
”
,
“
”
,
“
”
,
“
”
,
“
”
,
“
”
,
“
”
,
“
”
,
“
”
,
“
”
,
“
”
,
“
”
,
“
”
,
“
”
, or
“
”
.
TGA681_786FX(fx).book Page 5 Tuesday, February 19, 2013 5:21 PM
