Panasonic KX-TGA520 - 5.8 GHz FHSS Cordless Expansion Handset Operating Instructions Manual Download Page 53

Page: 53 / 84

Useful Info

rmation

Adv

anced Opera

tion

Preparatio

Voice Mail Service

For assistance, please call: 1-800-211-PANA(7262)

lephone System

Listening to Voice Mail Messages

The unit will let you know that someone has left new voice mail for you:
(a) the VM indicator will flash on the base unit,
(b) “

Voice Mail

” will be displayed on the handset,

” will flash on the handset, and

(d) the Ringer/Message Alert indicator on the handset will flash slowly if Message

Alert is turned on (p. 21) and the handset is not in use.

To listen to your voice mail message(s)

•

After listening to your message(s), “

” stops flashing but remains on the

handset display

Press the soft key (

), then press

[

]

[

]

•

“

Dial VM access#

” is displayed and the

number is dialed (p. 51).

•

If the handset beeps 3 times and “

Store VM

access#

” is displayed, a voice mail access

number is not stored. To store the number, see
page 51.

Follow the pre-recorded instructions.

When finished, press

[OFF]

Press

[VM]

•

The unit is connected to the telephone line and dials the access number
(p. 51) in speakerphone mode.

•

If the base unit beeps 3 times, a voice mail access number is not stored. To
store the number, see page 51.

Follow the pre-recorded instructions.

When finished, press

[SP-PHONE]

Handset Base Unit

V M

Handset

V M

Voice Mail

V M

Base Unit

TG5230.fm Page 53 Wednesday, February 4, 2004 9:51 AM

Summary of Contents for KX-TGA520 - 5.8 GHz FHSS Cordless Expansion Handset





















































































Search results

Summary of Contents for KX-TGA520 - 5.8 GHz FHSS Cordless Expansion Handset

Reviews:

Related manuals for KX-TGA520 - 5.8 GHz FHSS Cordless Expansion Handset

Brands by name

Popular brands

Panasonic KX-TGA520 - 5.8 GHz FHSS Cordless Expansion Handset, Operating Instructions Manual

Search results

Summary of Contents for KX-TGA520 - 5.8 GHz FHSS Cordless Expansion Handset

Reviews:

Related manuals for KX-TGA520 - 5.8 GHz FHSS Cordless Expansion Handset

Brands by name

Popular brands