Panasonic KX-TG9581B Page 64 Service Manual Download

Page: 64 / 109

KX-TG9581B/KX-TG9582B/KX-TGA950B

11.6.1.1.4. Installing the “Telephone Plug-in

Before installing “Telephone Plug-in”, make sure of the following:
– Microsoft Office Outlook is installed on your computer.
– The base unit is not connected to your computer with the mini USB cable (until instructed to do so).

Start Windows and exit all other applications.

You must be logged in as an administrator in order to install “Telephone Plug-in”.

Insert the included CD-ROM into your CD-ROM drive.

Installation starts automatically. If the installation does not start, double click

[Setup.exe]

your CD-ROM drive folder to start installing.

For Microsoft Windows Vista and Microsoft Windows 7 users:

Click

[Run Setup.exe]

when prompted.

When the language selection window is displayed, select the desired language and click

[Next]

When the “Telephone Plug-in” window is displayed, click

[Next]

Read the license agreement carefully. If you accept the terms of the license agreement, check
the box and click

[Next]

When the “Telephone Plug-in” install shield wizard is displayed, click

[Install]

When installation is finished, click

[Finish]

to complete the installation. Then remove the

CD-ROM from your CD-ROM drive.

Summary of Contents for KX-TG9581B














































































































Search results

Summary of Contents for KX-TG9581B

Reviews:

Related manuals for KX-TG9581B

Brands by name

Popular brands

Panasonic KX-TG9581B, Service Manual

Search results

Summary of Contents for KX-TG9581B

Reviews:

Related manuals for KX-TG9581B

Brands by name

Popular brands